. Italian . French
Mail form
> Azienda
> News
>Homepage >Products >Solutions to load the wheelchair inside the car >Roof Spider
>ROOF SPIDER

  
>USE OF THE ROOF SPIDER

>OTHER PHOTOS

>BROSCHURE
> link



 

The roof spider loads the wheelchair from either side of the vehicle.
Thanks to the fact that Roof Spider can load from either side of the vehicle it doesn’t matter if you choose to drive the vehicle or just travel as a passenger.
You just press the hand control button corresponding the side on which you are placed.
 

Roof Spider is designed for foldable manual wheelchairs of maximum 25 kg.
Thanks to the low weight (54 kg unloaded) you have a
choice of most vehicle makes and models.
Its height, it's 47 cm when the roof is closed and 112 cm when it is open.
The lenght is 235 cm, while the width is 125 cm.

 

 
 

Transfer from the wheelchair to the vehicle seat.
Place the wheelchair in a suitable position for the lifting device.
Press the hand control button that correspond to the side you are sitting.
Now the roof box lid opens and the lifting device is lowered towards the wheelchair.
Fold the wheelchair with the lifting device pressed in between the sides of the seat.
Press the hand control button (arrow up) to load the wheelchair.

  
 


Movie of the Roof Spider


ROOF SPIDER is crash tested with a 25 kg load and has passed tests such as a 2.5 kg hammertest at -20° C, shape permanence at +60° C, resistance to electromagnetic interference, fi re resistance etc.
The product is CE-marked.

By motor failure the box lid can be manually opened with the emergency tools.
Option: an emergency cable can be connected to a contact under the dashboard panel to allow operation in case of distribution box failure or hand control failure.

Learn how to use the Roof Spider

Roof Spider is an AUTOADAPT product.